Metrological support of digital electronic voltage transformers and low-power voltage transformers

Metrological support of digital electronic voltage transformers and low-power voltage transformers (sensors) is represented. The methods and reference measuring instruments of the State primary special standard of units of the ratio error and the phase displacement of AC electric voltage of power frequency in the range from to and units of electric capacitance and tangent of loss dissipation factor at AC voltage of power frequency in the range from 1 to 500 kV – GET 175-2023, used for metrological support of the measuring instruments mentioned above. The results of research of GET 175-2023 are presented. The expanded uncertainties of GET 175-2023 when reproducing the units of the ratio error and the phase displacement of AC electric voltage of power frequency for metrological support of analog low-power voltage transformers (sensors) include the budget of the uncertainties of the current comparator, low-voltage (reference) and high-voltage measuring measures, the high-voltage MVE-01 bridge (SA7400MA1 amplifi er) and are respectively 9.62·10^–5 and The expanded uncertainties of GET 175-2023 when reproducing the units of the ratio error and the phase displacement of AC electric voltage of power frequency for metrological support of electronic digital voltage transformers and digital low-power voltage transformers (sensors) include the budget of uncertainties of the converter «high voltage – current», converter «current – low voltage», converter «low voltage – a digital copy of voltage», a digital comparison device and constitutes 10.8·10^–5 and respectively. GET 175-2023 allows solving the problems of metrological support of electronic digital voltage transformers and digital low-power voltage transformers (sensors).

1. Grishin M. V. Legal and Applied Metrology. 2022, no. 4, pp. 39–44. (In Russ.)

2. Kiselev V. V., Rogozhin S. Yu., Grishin M. V., Dubrovskaya T. A., Kutsobin A. A. Legal and Applied Metrology, 2023, no. 3, pp. 5–13. (In Russ.)

3. Kiselev V. V., Kononogov S. A. Legal and Applied Metrology, 2010, no. 2, pp. 3 2–42. (In Russ.)

4. Telitchenko G. P. Legal and Applied Metrology, 2010, no. 2, pp. 47–51. (In Russ.)

5. Gubler G. B., Nikitin A. Yu., Shapiro E. Z., Alekseeva N. S. Measurement Standards. Reference Materials, 2020, no. 16(1), pp. 7–16. (In Russ.) https://doi.org/10.20915/2687-0886-2020-16-1-7-16

6. Weiss St., Peter de Graeve, Andersson A. G. Benefi ts of converting conventional instrument transformer data into smart grid capable process data utilizing IEC 61850 merging unit, 21st International Conference on Electricity Distribution, Frankfurt, 6–9 June 2011, no. 0472, pp. 1–4, available at: http://www.cired.net/publications/cired2011/part1/papers/CIRED2011_0472_final.pdf (accessed: 04.09.2023).

7. Uhov V. I., Polovnikov M. S., Macenko V. V. Informatizatsiya i sistemy upravleniya v promyshlennosti, 2016, no. 2, pp. 27–30. (In Russ.)

8. Kiselev V. V., Grishin M. V., Dubrovskaya T. A., Shkabura V. V., Chernecov V. F. Legal and Applied Metrology, 2019, no. 1, pp. 33–37. (In Russ.)

9. Kiselev V. V., Grishin M. V. Digital substation, 2020, no. 13, pp. 40–43. (In Russ.)

10. Grishin M. V., Kiselev V. V., Stepanov A. A. Legal and Applied Metrology, 2020, no. 4, pp. 24–29. (In Russ.)