Correlation-spectral method for measuring the parameters of the microrelief of precision surfaces of industrial products

The article considers a method for measurement the parameters of the microrelief of the surface of machine parts by optoelectronic and computer means, as an integral part of the technological process of manufacturing machine parts with precision surfaces. The method is based on computer processing of images of the studied microreliefs, considered as a set of realizations of a stationary random process. The number of realizations of the random process is assumed to be equal to the number of lines in the analyzed microrelief image. The microrelief image is considered as a matrix of random numbers. For this matrix, mathematical expectations, variances, standard deviations, correlation moments and the normalized autocorrelation coeffi cient of honey are calculated for the columns of the matrix. To conduct research on the proposed method, an optical-electronic complex was used, consisting of an instrumental microscope with a video camera and a computer for digital processing of the obtained images of the microrelief of reference samples with different roughness. The surface roughness Ra was estimated by standard methods on a profi lometer and ranged from 0.025 μm to 0.13 μm. When developing software for correlation-spectral image processing, OpenCV tools and the C++ language were used. According to the research results, it was found that the nature of the correlation functions is largely determined by the parameters of the studied microreliefs. To identify the studied microreliefs, we determined the analytical dependences of the arithmetic mean deviation of the microrelief surface profi le both on the average value of the variable component of the autocorrelation function and on the values of its spectral density. It has been established that for measuring the Ra microrelief by optoelectronic means, the most promising is the use of the spectral density of its autocorrelation function, calculated from its halftone image. The results of determining the parameters of the microrelief of the surfaces of the raceways of the inner rings of instrument bearings are presented.

1. Suslov A. G., Fedorov V. P., Nagorkin M. N. Engineering methods for technological support of regulated roughness parameters of machinery operation surfaces during machining, Science intensive technologies in mechanical engineering, 2019, no. 4(94), pp. 40–48. (In Russ.) https://doi.org/10.30987/article_5c90a59824edf6.80759568

2. Suslov A. G., Fedorov V. P., Nagorkin M. N., Pyrikov I. L. Complex approach to experimental investigations of metal-working technological systems to ensure parameters of quality and operation properties of machinery surfaces. Science intensive technologies in mechanical engineering. 2018, no. 10. pp. 3–13. (In Russ.) https://doi.org/10.30987/article_5bb4b1f9abbc54.46761484

3. Vinogradova G. N., Zakharov V. V. Fundamentals of Microscopy, part 2, St. Petersburg, ITMO University Publ., 2020, 248 p. (In Russ.)

4. Azarova V. V., Tsvetkova T. V. Roughness measurement of precision optical surfaces by the interference microscopy method. Journal of Instrument Engineering, 2014, vol. 57, no. 6, рр. 83–86. (In Russ.)

5. Laurens Liesenborghs, Marijke Peetermans, Jorien Claes, Tiago Rafael Veloso, Christophe Vandenbriele. Journal of Infectious Diseases, 2016, vol. 213(7), рр. 1148–1156. https://doi.org/10.1093/infdis/jiv773

6. Kelly Rae Chi. Nature, 2009, vol. 462(7273), рр. 675–678. https://doi.org/10.1038/462675a

7. Abramov A. D., Nikonov A. I. Measurement Technique, 2019, vol. 61, no. 11, pp. 1086–1090. https://doi.org/10.1007/s11018-019-01553-w

8. Wentzel E. S. Teoriya veroyatnostej [Theory of probabilities], 10th ed. ster. Moscow, KNORUS Publ., 2006, pp. 339–346. (In Russ.)

9. Gary Bradsky, Adrian Koehler. Learning OpenCV3, Boston, O’Reilly, 2017, 975 p.

10. Sharapov A. A., Baranov G. V. Comparative analysis of methods for assessing the quantitative characteristics of the roughness of nanoscale structures. Proceedings of MIPT, 2018, vol. 10, no. 2, pp. 72–79. (In Russ.)

11. Tolstikhina A. L. Doctoral dissertation Mathematics and Physics Sciences (Shubnikov Institute of Crystallography of the Russian Academy of Sciences. Moscow, 2013).

12. Ovsyannikov V. E., Tereshchenko V. Yu. Korrelyacionnyj analiz profi lya poverhnosti. Izvestiya Tula State University, 2013, no. 10, pp. 74–76. (In Russ.)

13. Musalimov V. M., Valetov V. A. Dynamics of frictional interaction. St. Petersburg, St. Petersburg State University Publ., 2006, 191 p. (In Russ.)

14. Husu A . P., Vitenberg Yu. R., Pal’mov V. A. Sherohovatost’ poverhnostej. Teoretiko-veroyatnostnyj podhod. Мoscow, Nauka Publ., 1975, 344 p. (In Russ.)

15. Kolomiets L. V., Ponikarova N. Yu. Metod naimen’shih kvadratov. Samara, Samara University Press, 2017, 32 p. (In Russ.)