Generate QR code
Open Access
Subscription Access
State primary special standard of length in the field of measurements of deviations from straightness and flatness GET 130-2019
https://doi.org/10.32446/0368-1025it.2021-3-3-8
Abstract
The information on content, theory of operation and metrological concepts of the State primary special standard of length unit in the field of measurements of deviations from straightness and flatness, GET 130-2019, conducted in 2019, is provided. The results of metrological characteristics research of the measuring interference system included in GET 130-2019 are described. With the help of an additional measuring interference system, the unit is reproduced on the basis of fundamental physical constants and the properties of matter – interference, which eliminates additional instrumental sources of errors (uncertainties). The transfer of length in the field of measurements of deviations from straightness and flatness in the range from 0 to 50 μm on the length of the measured surface up to 30 m with the highest accuracy in Russia is ensured. The conducted comparisons proved that metrological characteristics of GET 130-2019 correspond to those presented in the database of measuring capabilities of the International Bureau of Weights and Measures (BIPM) on the already confi rmed by means of stationary and autonomous measuring profile length to 5 m, as well as the level of foreign standards, presented in BIPM on the length to 30 m.
About the Authors
Y. M. Shimolin
Ural Research Institute for Metrology – branch office VNIIM
Russian Federation
Russian Federation
Yuriy R. Shimolin
Ekaterinburg
L. A. Tribushevskaya
Ural Research Institute for Metrology – branch office VNIIM
Russian Federation
Russian Federation
Lidiya A. Tribushevskaya
Ekaterinburg
A. S. Seregina
Ural Research Institute for Metrology – branch office VNIIM
Russian Federation
Russian Federation
Aleksandra S. Seregina
Ekaterinburg
References
1. Shimolin Ju. R., Zlydnikova L. A., Russian Metrological Encyclopedia, ed. by V. V. Okrepilov, vol. 1, St. Petersburg, IIF “Liki Rossii” Publ., 2015, pp. 235–239 (in Russ.).
2. Shimolin Yu. R., Zlydnikova L. A., Мeasurement Techniques, 2016, vol. 59, no. 2, pp. 105–110. https://doi.org/10.1007/s11018-016-0925-1
3. Leonov V. V., Analiz metodov izmerenij otklonenij ot prjamolinejnosti i ploskostnosti poverhnostej, Moscow, Izd-vo standartov Publ., 1982, 247 p. (in Russ.).
4. Bazykin S. N., Information-measuring systems for the measurement of deviations from straightness of movement, Modern High Technologies, 2016, no. 7 (part 1), pp. 21–25 (in Russ.).
5. Bazykin S. N., Bazykina N. A., Kapezin S. V., Izmerenie otklonenij ot prjamolinejnosti s pomoshh’ju lazernyh interferometrov, International Simpozium “Reliability and Quality”, PGU Publ., Penza, 2011, pp. 8–12 (in Russ.).
6. Zaharenko Yu. G., Kononova N. A., Lejbengardt G. I., Chekirda K. V., Мeasurement Techniques, 2012, vol. 55, no. 5, pp. 519–525. https://doi.org/10.1007/s11018-012-9992-0
7. Aleksandrov V. S., Zaharenko Yu. G., Kononova N. A., Lejbengardt G. I., Fedorin V. L., Chekirda K. V., Мeasurement Techniques, 2012, vol. 55, no. 6, pp. 595–602. https://doi.org/10.1007/s11018-012-0007-y
8. Guide to the Expression of Uncertainty in Measurement, St. Petersburg, VNIIM Publ., 2015 (in Russ.).
Review
For citations:
Shimolin Y.M., Tribushevskaya L.A., Seregina A.S. State primary special standard of length in the field of measurements of deviations from straightness and flatness GET 130-2019. Izmeritel`naya Tekhnika. 2021;(3):3-8. (In Russ.) https://doi.org/10.32446/0368-1025it.2021-3-3-8
Views:
105
Email this article 