Generate QR code
Open Access
Subscription Access
Areas of improvement of measuring systems and their metrological support
https://doi.org/10.32446/0368-1025it.2023-8-24-29
Abstract
The actual task of analyzing the features of measuring systems and their metrological support is formulated. Promising directions for the development of measuring systems, including virtual ones, were considered. An analysis of such areas of development of measuring systems as remote and synchronized vector measurements, cloud technologies, the Internet of Things, big data and artifi cial intelligence was carried out. An analysis of some innovative solutions was carried out, based both on the use of biological sensors and on the use of hybrid metrology - on the introduction of structural redundancy in the composition of measuring systems, as well as temporary and algorithmic redundancy in the software of measuring systems. As a result of the review, it is concluded that the integration of component functions is an objective diffi culty in highlighting measuring systems as part of complex technical systems, but gives more and more new capabilities to technical systems with measuring functions. An analysis of such areas of improvement of metrological support of measuring systems as self-diagnostics and self-monitoring, remote and automated calibration and verifi cation, the use of digital twins, big data and artifi cial intelligence, as well as the establishment of adaptive intervals between calibrations and checks was carried out. The conclusion concludes on the need to minimize bureaucratic procedures, automate metrological procedures, and the expediency of switching from periodic to adaptive procedures, mainly without human participation.
About the Author
A. A. Danilov
The State Regional Center of Standardization, Metrology and Tests in the Penza Region
Russian Federation
Russian Federation
Aleksandr A. Danilov
Penza
References
1. Danilov A. A. Measurement Techniques, 2016, vol. 59, no. 3, pp. 899–903. https://doi.org/10.1007/s11018-016-1064-4
2. Modern Solutions for Protection, Control, and Monitoring of Electric Power Systems, eds. Héctor J. Altuve Ferrer, Edmund O. Schweitzer, III, Schweitzer Engineering Laboratories, 2010, 361 p.
3. Alexandra von Meier, Merwin L. Brown, Reza Arghandeh, Emma M. Stewart. A White Paper by the NASPI Distribution Task Team, January 2018, 62 p. https://doi.org/10.13140/RG.2.2.35267.04649
4. Sokolov V. G. Intellektual’naya sistema akusticheskogo monitoringa setej teplo- i vodosnabzheniya, available at: https://digitalr.ru/wp-content/uploads/2021/08/sistemaakusticheskogomonitoringa_compressed.pdf ( accessed: 16.06.2023). (In Russ.)
5. Sistema monitoringa avtomobil’nyh dorog na baze raspredelennogo akusticheskogo sensora, available at: https://www.smarts.ru/media/filer_public/0a/1a/0a1a8ea4-181b-4ecf-951e-fe4d58858da5/smarts_-_am_-_rfrit_web.pdf (accessed: 16.06.2023). (In Russ.)
6. Yashin A. V. Normativnye pravovye voprosy metrologicheskogo obespecheniya cifrovyh informacionno-izmeritel’nyh sistem OAO “RZHD”, available at: https://opzt.ru/wp-content/uploads/2023/05/5.-jashin-a.v..pdf?ysclid=llaucwidj5255916465 (accessed: 16.06.2023). (In Russ.)
7. Ohotnikov A. L. Automation, communications, informatics, 2023, № 3, pp. 21–24. (In Russ.) https://doi.org/10.34649/AT.2023.3.3.003
8. Danilov A. A., Kucherenko Y. V. Measurement Techniques, 2013, vol. 55, no. 12, pp. 1447–1450. https://doi.org/10.1007/s11018-013-0147-8
9. Berzhinskaya M. V., Danilov A. A., Kucherenko Yu. V., Ordinartseva N P. Measurement Techniques, 2014, vol. 57, no. 3, pp. 228–230. https://doi.org/10.1007/s11018-014-0436-x
10. Budylina E. A., Danilov A. A. Journal of Physics: Conference Series, 2019, vol. 1379, рр. 1–5. https://doi.org/10.1088/1742-6596/1379/1/012063
11. Berzhinskaya M. V., Danilov A. A. Measurement Techniques, 2009, vol. 52, no. 3, pp. 220–222. https://doi.org/10.1007/s11018-009-9263-x
12. Mark-Alexander Henn, Richard M. Silver, John S. Villarrubia, et al. Proc. SPIE 9424, Metrology, Inspection, and Process Control for Microlithography XXIX, 2015, 94241J. https://doi.org/10.1117/12.2175653
13. Alok Vaid, Narender Rana and Cornel Bozdog. Hybrid metrology for advanced semiconductor fabrication, available at: https://spie.org/news/3827-hybrid-metrology-for-advanced-semiconductor-fabrication?SSO=1 (accessed: 16.06.2023).
14. Pronin A. N., Sapozhnikova K. V., Taymanov R. E. Reliability of measurement information in control systems. Problems and their solution. T-Comm, 2015, vol. 9, no. 3, pp. 32–37. (In Russ.)
15. Kuzin A. Yu., Kroshkin A. N. Regulatory aspects of digital transformation in metrology. Legislative and Applied Metrology, 2022, no. 5, pp. 14–21. (In Russ.) https://www.elibrary.ru/lghnii
16. Kashirkina I. M., Pronin A. N., Gorbachev A. A., Churilov S. N. Technical systems and devices with measurement functions: a terminological incident or a promising direction for the development of legislative and applied metrology. Part III. Prerequisites and ways of implementing the concept of technical systems and devices with measurement functions in practice. Chief Metrologist, 2023, no. 1, pp. 4–12. (In Russ.)
17. Taymanov R., Pronin A., Sapozhnikova K., Baksheyeva Iu., Danilova I. Journal of Physics: Conference Series, 2019, vol. 1379, pp. 1–8. https://doi.org/10.1088/1742-6596/1379/1/012049
18. Kalashnikov A. A. Avtomatizaciya v promyshlennosti, 2023, no. 4, pp. 12–16. (In Russ.) https://doi.org/10.25728/avtprom.2023.04.05
19. Danilov A. A. Practical issues of calibration of measuring equipment in test laboratory. Legislative and Applied Metrology, 2022, no. 4, рр. 30–33. (In Russ.)
20. Medvedevskikh S. V., Teteruk R. A. Measurement Techniques, 2022, vol. 65, no. 7, pp. 515–519. https://doi.org/10.1007/s11018-023-02112-0
Review
For citations:
Danilov A.A. Areas of improvement of measuring systems and their metrological support. Izmeritel`naya Tekhnika. 2023;(8):24-29. (In Russ.) https://doi.org/10.32446/0368-1025it.2023-8-24-29
Views:
387
Email this article 