Generate QR code
Open Access
Subscription Access
The question of metrological traceability of COOMET reference materials. Pt. 2. Reference materials characterization
https://doi.org/10.32446/0368-1025it.2021-8-30-37
Abstract
The concept of reference materials metrological traceability establishment within the framework of Euro-Asian Cooperation of National Metrological Institutions (COOMET) Technical Committee 1.12 “Reference Materials” (TC 1.12) is overviewed. Particular cases of COOMET Reference Materials development are provided. The authors considered approaches to demonstrate a metrological traceability of reference materials with different types of their characterisation, e. g., appliance of national measurement standards, or performance of interlaboratory comparison testing, or usage of primary reference measurement procedure for reference materials characterisation if a state measurement standard for units is absent.
About the Authors
S. V. Medvedevskikh
D. I. Mendeleyev Institute for Metrology (VNIIM)
Russian Federation
Russian Federation
Sergey V. Medvedevskikh
St. Petersburg
E. P. Sobina
UNIIM – Affiliated Branch of D. I. Mendeleev Institute for Metrology
Russian Federation
Russian Federation
Egor P. Sobina
Ekaterinburg
O. N. Kremleva
UNIIM – Affiliated Branch of D. I. Mendeleev Institute for Metrology
Russian Federation
Russian Federation
Olga N. Kremleva
Ekaterinburg
M. Y. Medvedevskikh
UNIIM – Affiliated Branch of D. I. Mendeleev Institute for Metrology
Russian Federation
Russian Federation
Мaria Yu. Medvedevskikh
Ekaterinburg
A. V. Sobina
UNIIM – Affiliated Branch of D. I. Mendeleev Institute for Metrology
Russian Federation
Russian Federation
Alena V. Sobina
Ekaterinburg
N. S. Taraeva
UNIIM – Affiliated Branch of D. I. Mendeleev Institute for Metrology
Russian Federation
Russian Federation
Nataliya S. Taraeva
Ekaterinburg
References
1. Medvedevskikh S. V., Sobina E. P., Kremleva O. N., Medvedevskikh М. Yu., Sobina A. V., Taraeva N. S., Izmeritel’naya tekhnika, 2021, no. 8, pp. 25–29. (In Russ.) https://doi.org/10.32446/0368-1025it.2021-8-25-29
2. Skutina A. V., Terentiev G. I., Measurement Techniques, 2011, vol. 54, no. 9, pp. 964–970. https://doi.org/10.1007/s11018-011-9835-4
3. Zyskin V. M., Shimolin A. I., Sobina A. V., Terentiev G. I., Measurement Standards. Reference Materials, 2016, no. 2, pp. 44– 54. (In Russ.) https://doi.org/10.20915/2077-1177-2016-0-2-44-54
4. Quinn T. J., Metrologia, 1997, vol. 34, рp. 61–65. https://doi.org/10.1088/0026-1394/34/1/9
5. Ikins W., De Vries J., Wolf W., Oles P., Carpenter D., Praley N., Ngsh-Ngwainbi J., The Referee AOAC International, 1993, vol. 17, no. 7, pp. 1–7.
6. Wolf W. R., Andrews K. W., Fresenius J Anal Chem, 1995, vol. 352, no. 1–2, pp. 73–76. https://doi.org/10.1007/BF00322300
7. Karnaukhov A. P. Adsorbtsiya. Tekstura dispersnykh i poristykh materialov [The texture of dispersed and porous materials], Novosibirsk, Nauka Publ., Sibirskoe otdelenie, 1999. (In Russ.)
8. Webb P. A., Orr C., Analytical Methods in Fine Particle Technology, Micromeritics Instrument Corporation, 1997, 301 p.
9. Fenelonov V. B., Vvedenie v osnovy adsorbtsii i teksturologii [Introduction to the basics of adsorption and texturology], Novosibirsk, SO RAN Publ., 2004. (In Russ.)
10. Grek S., Sing K., Adsorption, specifi c surface area, porosity, 2nd ed., Academic Press, 1982, 304 p.
Review
For citations:
Medvedevskikh S.V., Sobina E.P., Kremleva O.N., Medvedevskikh M.Y., Sobina A.V., Taraeva N.S. The question of metrological traceability of COOMET reference materials. Pt. 2. Reference materials characterization. Izmeritel`naya Tekhnika. 2021;(8):30-37. (In Russ.) https://doi.org/10.32446/0368-1025it.2021-8-30-37
Views:
145
Email this article 