Метод измерения интегральных характеристик сигнала
Abstract
A new method of measurement of active power and effective value of AC signals over a time interval twice shorter than in other known methods is suggested. The measurement is carried out by simple summation of instantaneous power sampling without measuring time and signal frequency adjustment. The computer simulation allows to estimate the accuracy of proposed algorithm.
References
1. Clarke J.J., Stockton J.R. Principles and theory of wattmeters operating on the basis of regularly spaced sample pairs // J. Phys. E: Sci. Instrum. 1982. V. 15.P.645–652.
2. Petrovic P., Stevanovic M.Digital Processing and Reconstruction of Complex AC Signals. N.Y.: Springer, 2009.
3. IEC 50160. Voltage characteristics of electricity supplied by public distribution networks. 2011.
4. Kunjumuhammed L.P., Mishra M.K.A Control Algorithm for Single-Phase Active Power Filter Under Non-Stiff Voltage Source // IEEE Trans. Power Electronics.2006. V.21.N. 3.P.822–825.
5. Martens O.е. а. DSP-based Power Quality Monitoring Device // IEEE Int.Symp.Intelligent Signal Proc. 2008. P.1–5.
6. Hindersah H.е. а.Prototype development of single phase prepaid KWh meter //Proc. Int.Conf. Electrical Engineering and Informatics. 2011. P.1–6.
7. Jiekang W., Jun L., Jixiang W. High-accuracy, wide-range frequency estimation methods for power system signals under nonsinusoidal conditions// IEEE Trans. Power Del. 2005. V. 20.N.1.P.366–374.
8. Kuseljević M. D.A Simultaneous Estimation of Frequency, Magnitude, and Active and Reactive Power by Using Decoupled Modules// IEEE Trans. Instrum. Meas.2010. V. 59.N. 7.P. 1866–1873.
9. Numerical Integration: Curse Materials, 2005, Worcester (MA, USA): Dept. Math. Sci.—Worcester Polytech. Inst. [Электрон. ресурс]. Ошибка! Недопустимый объект гиперссылки. ath.wpi.edu/Course_Materials/MA1023C05/num_int/node1.html (датаобращения ).
10. Poberezhskiy Y. S.,Poberezhskiy G. Y.Sampling and Signal Reconstruction Circuits Performing Internal Antialiasing Filtering and Their Influence on the Design of Digital Receivers and Transmitters //IEEE Trans. CircuitsandSystems-I. 2004. V. 51. N. 1. P. 118–129.
11. Guide to the Expression of Uncertainty in Measurement. Geneva: ISO,1993.
12. IEC 50160.Voltage characteristics of electricity supplied by public distribution networks. 2011.
13. Hoseini H. Z., Kale I., Shoaei O.Modeling of Switched-Capacitor Delta-Sigma Modulators in SIMULINK // IEEE Trans. Instrum. Meas.2005. V. 54.N. 4.P. 1646–1654.
14. Petrovic P.New Digital Multimeter for Accurate Measurement of Synchronously Sampled AC Signals // IEEE Trans. Instrum. Meas. 2004. V. 53.N. 3.P.716–725.
15. Coakley K.J. e. a.Adaptive characterization of jitter noise in sampled high-speed signals// IEEE Trans. Instrum. Meas.2003. V. 52.N. 5.P. 1537–1547.
16. Vendersteen G., Pintelon R. Maximum likelihood estimator for jitter noise models //IEEE Trans. Instrum. Meas. 2000. V. 49.N. 6.P.1282–1284.
17. Germer H.High-precision ac measurements using the Monte Carlo method// IEEE Trans. Instrum. Meas. 2001. V.50.P. 457–460.
18. http://us.fluke.com/usen/products/
19. Hindersah H. е. а.Prototype development of single phase prepaid KWh meter// Int.Conf. Electrical Engineering and Informatics. 2011.P. 1–6.
20. Asquerino J.C.M.е. а.Measurement of Apparent Power Components in the Frequency Domain// IEEE Trans. Instrum. Meas. 1990.V. 39.N. 4.P. 583–587.
21. Odzemir A.,Ferikoglu ALow cost mixed-signal microcontroller based power measurement technique //IEE Proc.Sci.Meas.andTechnol. 2004.V.151.N. 4.P. 253–258.
Review
For citations:
. Izmeritel`naya Tekhnika. 2013;(2):51-57. (In Russ.)
Views:
72
Email this article 