

Algorithmization of calculation of fractal parameters of rough surface relief according to GOST R ISO 25178-2-2014
https://doi.org/10.32446/0368-1025it.2020-8-20-27
Abstract
Russian version of the ISO 25178-2:2012 standard is commented. The functions provided by the standard for calculating fractal dimension are considered, and the algorithms for calculating them in the Mathcad environment are described. An example of calculations based on the results of measurements of the height of the surface irregularities of the gauge block obtained using an atomic force microscope is given.
About the Authors
B. N. MarkovRussian Federation
Boris N. Markov
Моscow
D. A. Masterenko
Russian Federation
Dmitry A. Masterenko
Моscow
P. N. Emelyanov
Russian Federation
Petr N. Emelyanov
Моscow
V. I. Teleshevskiy
Russian Federation
Vladimir I. Teleshevskiy
Моscow
References
1. . Potapov A. A., Proceedings of the IV International conference “Deformation and destruction of materials and nanomaterials” DFMN-2011, Moscow, October 25–28, 2011, Moscow, 2011, pp. 953–955.
2. Bavykin O. B., Vyacheslavova O. F., Izvestiya MSTU “MAMI”, 2013, vol. 1, no. 1 (15), pp. 14–18 (in Russian).
3. Grigoriev A. Ya., Fizika i mikrogeometriya tekhnicheskih poverhnostej, Minsk, Belorusskaya nauka Publ., 2016. 247 p. (in Russian).
4. Altaisky M. V., Ivanov V. V., Korenev S. A., Orelovich O. L., Puzynin I. V., Chernik V. V., Brief reports of the Joint Institute for Nuclear Research, 1997, no. 2 (82), pp. 37–46.
5. Maraeva E. V., Averin I. A., Istomina M. S., Moshnikov V. A., Nalimova S. S., Pronin I. A., and Semenov K. N., Journal of Physics: Conference Series, 2016, vol. 741, no. 1, р. 012185. https://doi.org/10.1088/1742-6596/741/1/012185
6. Savenkov G. G., Barakhtin B. K., Journal of Applied Mechanics and Technical Physics, December 2011, vol. 52, no. 6, pp. 997–1003. https://doi.org/10.1134/S0021894411060186
7. Potapov A. A., Laktyunkin A. V., Proceedings of the International scientifi c conference “Radiation and scattering of electromagnetic waves. IREMV, 2007” , Taganrog, June 25–30, 2007, Taganrog, 2007, vol. 1, pp. 435–440.
8. Tikhomirov V. P., Izmerov M. A., Bulletin of the Bryansk State Technical University, 2015, no. 1 (45), pp. 60–66 (in Russian).
9. Grigoriev A. S., Vestnik MSTU “STANKIN”, 2012, no. 1 (18), pp. 34–43 (in Russian).
10. Martinova L. I., Sokolov S. V., and Grigoryev A. S., Automation and Remote Control, 2012, vol. 73, no. 4, pp. 742–749. https://doi.org/10.1134/S0005117912040133
11. Ait Sghir Khalid, El Badaoui Mohamed, Francois Guillet, Driss Aboutajdine and Jean-Paul Dron, Mechanics & Industry, 2014, vol. 15, no. 6, pp. 497–507. https://doi.org/10.1051/meca/2014052
12. Wang G. F., Yang Y. W., Zhang Y. C., and Xie Q. L., Sensors and Actuators A: Physical, 2014, vol. 209, pp. 24–32. https://doi.org/10.1016/j.sna.2014.01.004
13. Kozochkin M. P., Gurin V. D., Kochetkova A. I., Vestnik MSTU “STANKIN”, 2014, no. 4 (31), pp. 113–118 (in Russian).
14. Potapov K. G., Siritzky A. B., Vestnik MSTU “STANKIN”, 2014, no. 4 (31), pp. 107–112 (in Russian).
15. Maia L. H. A., Abrao A. M., Vasconcelos W. L., Sales W. F., and Machado A. R., Tribology International, 2015, vol. 92, pp. 519–532. https://doi.org/10.1016/j.triboint.2015.07.024
16. Zverev I. A., Fokin P. V., Vestnik MSTU “STANKIN”, 2017, no. 4 (43), pp. 52–58 (in Russian).
17. Masterenko D. A., Skoptsov E. S., Measurement Techniques, 2020, vol. 62, no. 11, pp. 953–959. https://doi.org/10.1007/s11018-020-01718-y
18. Leach R., Fundamental Principles of Engineering Nanometrology, 2nd Edition, Elsevier, 2014, 384 p.
19. Markov B. N., Melikova O. N., Shulepov A. V., Measurement Techniques, 2017, vol. 60, no. 5, pp. 451–456. https://doi.org/10.1007/s11018-017-1216-1
20. Dubuc B., Zucker S. W., Tricot C., Quiniou J. F., and Wehbi D., Proceeding of the Royal Society London A, 1989, vol. 425, no. 1868, pp. 113–127. https://doi.org/10.1098/rspa.1989.0101
Review
For citations:
Markov B.N., Masterenko D.A., Emelyanov P.N., Teleshevskiy V.I. Algorithmization of calculation of fractal parameters of rough surface relief according to GOST R ISO 25178-2-2014. Izmeritel`naya Tekhnika. 2020;(8):20-27. (In Russ.) https://doi.org/10.32446/0368-1025it.2020-8-20-27