Generate QR code
Open Access
Subscription Access
The State primary standard of the unit of specific heat capacity of solids GET 60-2019
https://doi.org/10.32446/0368-1025it.2020-6-3-8
Abstract
The paper describes the creation of the new State standard of thermal capacity of solids. The main point of the project is the design of the high accuracy adiabatic calorimeter КА-С4. The construction and the modes of operation of installation are presented. The sources of uncertainty and the resulting values of accuracy are analyzed. Also the paper contains the information about the measures for the transmitting of the unit to the devices of lower accuracy.
About the Authors
T. A. Kompan
D. I. Mendeleyev Institute for Metrology (VNIIM)
Russian Federation
Russian Federation
Tatiana A. Kompan
St. Petersburg
V. I. Kulagin
D. I. Mendeleyev Institute for Metrology (VNIIM)
Russian Federation
Russian Federation
Valentin I. Kulagin
St. Petersburg
V. V. Vlasova
D. I. Mendeleyev Institute for Metrology (VNIIM)
Russian Federation
Russian Federation
Viktoriya V. Vlasova
St. Petersburg
S. V. Kondratiev
D. I. Mendeleyev Institute for Metrology (VNIIM)
Russian Federation
Russian Federation
Sergey V. Kondratiev
St. Petersburg
A. Ya. Lukin
Peter the Great St. Petersburg Polytechnic University
Russian Federation
Russian Federation
Alexander Ya. Lukin
St. Petersburg
N. F. Pukhov
D. I. Mendeleyev Institute for Metrology (VNIIM)
Russian Federation
Russian Federation
Nikolay F. Pukhov
St. Petersburg
References
1. Pogorel’tsev E. I., Mel’nikova S. V., Kartashev A. V., Gorev M. V., Flerov I. N., Laptash N. M., Physics of the Solid State, 2017, vol. 59(5), pp. 986–991. DOI:10.1134/S1063783417050250
2. Schawe J. E. K., Pogatscher S., Löffl er J. F., Thermochimica Acta, 2020, vol. 685, 178518, рр. 1–8. DOI:10.1016/j.tca.2020.178518
3. Uddin K., Amirul Islam M., Mitra S., Lee J., Thu K., Saha B. B., Koyama S., Applied Thermal Engineering, 2018, 129, рр. 117–126. DOI:10.1016/j.applthermaleng.2017.09.057
4. Gao Y., Zhao B., Yang B., Schick C., Fast Scanning Calorimetry, 2016, pp. 691–721. DOI:10.1007/978-3-319-31329-0_21
5. Lyubina J., Magnetocaloric Materials, Springer Series in Materials Science, 2016, 115–186. DOI:10.1007/978-3-319-26106-5_4
6. Musikhin A. E., Bespyatov M. A., Shlegel V. N., Grigorieva V. D., Journal of Alloys and Compounds, 2020, vol. 830, 154592. DOI:10.1016/j.jallcom.2020.154592
7. George T. Furukawa, Thomas B. Douglas, Robert E. McCoskey, and Defoe C. Ginnings, Journal of Research of the National Bureau of Standards, 1956, vol. 57, no. 2, Research Paper 2694, рр. 67–82. DOI:10.6028/jres.057.008
8. Defoe C. Ginnings, Thomas B. Douglas, and Anne F. Ball, U. S. Department of Commerce National Bureau of Standards, Part of the Journal of Research of the National Bureau of Standards, July 1950, vol. 45, Research Paper RP2110, рр. 23–33. DOI:10.6028/jres.045.003
9. West E. D., and Ginnings D. C., Journal of Research of the National Bureau of Standards, April 1958, vol. 60, no. 4, рр. 309–316. DOI:10.6028/jres.060.034
10. Donald G. Archer, J. Chem. Eng. Data, 2003, vol. 48, pp. 1157–1163. DOI:10.1021/je030112g
11. Pramann A., Krupke H.-W., Moriya Y., Rudtsch S., and Sarge S. M., Phase transitions of gallium and indium, determined by adiabatic calorimetry, article Physikalisch-Technische Bunsentagung, Anmerkungen zur Konferenz PTB, Saarbrücken, Germany, 1–3 May 2008, p. 279.
12. Sarge S. M., Gmelin E., Hohne G. W. H., Cammenda H. K., Hemminger W., Eysel W., Kalibrierung des dynamisher Kalorimeter, PTB-Mitteilungen Heft 6, 1993, рр. 491–512. ISSN 0030-834X 13. Haruka A. B. E., AIST Bulletin of Metrology, 2008, vol. 7, no. 2, pp.101–116.
13. Hideyuki Kato, and Tetsuya Baba, Japanese Journal of Applied Physics, 2011, vol. 50, pp. 11RG01–111RG03. DOI:10.1143/JJAP.50.11RG01
14. Yoichi Takahashi, Pure & Appl. Chern., 1997, vol. 69, no. 11, pp. 2263–2269. DOI:10.1351/pac199769112263
15. Tetsuya Baba, Metrologia, 2010, vol. 47, pp. S143–S155. DOI:10.1088/0026-1394/47/2/S12
16. Matsumoto T., Barreiro G., Ono A., Measurements of Specifi c Heat Capacity and Hemispherical Total Emissivity at High Temperatures Using a Feedback-Controlled Pulse-Heating Technique, Proc. 20th Japan Symposium on Thermophysical Properties, 1999, pp. 479–482.
17. Zhi Cheng Tan, Quan Shi, and Xin Liu, Construction of High-Precision Adiabatic Calorimeter and Thermodynamic Study on Functional Materials, In book: Calorimetry – Design, Theory and Applications in Porous Solids. DOI:10.5772/intechopen.76151
18. Frenkel’ I. M., Sergeev O. A., Measurement Techniques, 1975, vol. 18, no. 4, pp. 545–551. DOI:10.1007/BF00817507
19. Hemminger W., Hohne G. W. H., Calorimetry-Fundamentals and Practice, VCH Verlag, Weinheim,1984, 176 p.
20. Donald G. Archer, J. Phys. Chem. Ref. Data, 1993, vol. 22, no. 6. DOI:10.1063/1.555931
21. National Bureau of Standards Certifi cate Standard Reference Material 720 Synthetic Sapphire (а-Al2O3), Publications NBS, U.C. Department of commerce, Washington D.C. 20234, April 1982, 3 p.
22. Svein Stolen, Ronny Glockner, and Fredrik Gronvold, J. Chem. Thermodynamics, 1996, vol. 28, pp. 1263–1281. DOI:10.1006/jcht.1996.0113
23. Michio Sorai, J. Chem. Thermodynamics, 1992, vo 24, pp. 167–180. DOI:10.1016/S0021-9614(05)80046-1
Review
For citations:
Kompan T.A., Kulagin V.I., Vlasova V.V., Kondratiev S.V., Lukin A.Ya., Pukhov N.F. The State primary standard of the unit of specific heat capacity of solids GET 60-2019. Izmeritel`naya Tekhnika. 2020;(6):3-8. (In Russ.) https://doi.org/10.32446/0368-1025it.2020-6-3-8
Views:
156
Email this article 