|Generate QR code
Open Access
Subscription Access
National primary standard machine of Shore D hardness scale for metals and Leeb hardness scales
https://doi.org/10.32446/0368-1025it.2020-2-6-10
Abstract
The article presents the results of studies to improve the National primary standard machine for hardness of metals on the shore D scale GET 161-2001, which were performed in FSUE “VNIIFTRI” from 2016 to 2018 in accordance with the technical task of Rosstandart. The improvement was carried out in order to ensure the uniformity of hardness measurements on the Leeb scales. The created new parts of the primary standard machine, which are settings for reproducing hardness numbers on the Leeb scales, are considered. Metrological characteristics of the upgraded and adopted National primary standard machine (GET 161-2019) were investigated, the budget of measurement uncertainty was calculated for reproducing hardness numbers on the Leeb scales.
About the Authors
A. E. Aslanyan
Russian metrological institute of technical physics and radio engineering (VNIIFTRI)
Russian Federation
Russian Federation
Andrey E. Aslanyan
Mendeleevo, Moscow Region
E. G. Aslanyan
Russian metrological institute of technical physics and radio engineering (VNIIFTRI)
Russian Federation
Russian Federation
Eduard G. Aslanyan
Mendeleevo, Moscow Region
S. M. Gavrilkin
Russian metrological institute of technical physics and radio engineering (VNIIFTRI)
Russian Federation
Russian Federation
Sergey M. Gavrilkin
Mendeleevo, Moscow Region
A. S. Doynikov
Russian metrological institute of technical physics and radio engineering (VNIIFTRI)
Russian Federation
Russian Federation
Aleksandr S. Doynikov
Mendeleevo, Moscow Region
A. N. Shchipunov
Russian metrological institute of technical physics and radio engineering (VNIIFTRI)
Russian Federation
Russian Federation
Andrey N. Shchipunov
Mendeleevo, Moscow Region
References
1. Doynikov A. S. Izmeryemaya velichina. Bol’shaya Rossiyskaya enciklopediya, 2016, available at: https://bigenc.ru/physics/text/2002348(accessed:06.12.2019) (in Russian).
2. Doynikov A. S. Izmeryemoe svoistvo. Bol’shaya Rossiyskaya enciklopediya, 2016. available at: https://bigenc.ru/physics/text/2002364 (accessed: 06.12.2019) (in Russian).
3. Doynikov A. S., Lekcii po metrologii, Mendeleevo, FSUE “VNIIFTRI” Publ., 2018, p. 292 (in Russian).
4. Aslanyan E. G., Balakhanov M. V., Gusyatinskaya N. S., Doinikov A. S., Kozlov V. I., Safarov N. A., Shlegel V. R., Measurement Techniques, 2002, vol. 45, no. 3, pp. 223–227. DOI:10.1023/A:1015902517391
5. Tak N. H., Bahng G. W., Kim T. G., Verifi cation results of Leeb hardness indicating devices from diff erent manufacturers using the Leeb hardness reference voltage signal, XXI IMEKO World Congress “Measurement in Research and Industry”, August 30 – September 4, 2015, Prague, Czech Republic.
6. Herrmann K., Hardness Testing Principles and Applications. Leeb Method, Published by ASM International, Novelty, USA, 2011, pp. 78–86.
7. Yamamoto M., Yamamoto T., Miyahara K., Maki S., Nakamura M., Proof examination on small rebound hardness carried out with HLD/HLE standard blocks, XX IMEKO World Congress Metrology for Green Growth September 9−14, 2012, Busan, Republic of Korea.
8. Schwenk D., Leeb hardness calibration machine, IMEKO 2010 TC3, TC5 and TC22 Conferences Metrology in Modern Context November 22−25, 2010, Pattaya, Chonburi, Thailand, pp. 369–372.
9. Wei S., Wu Z., Qingzhong L., Leeb hardness standard with laser measuring, XX IMEKO World Congress Metrology for Green Growth September 9−14, 2012, Busan, Republic of Korea, pp. 304–307.
10. Schwenk D., Bandel M., Calibration of the impact velocity at portable hardness testing devices in accordance with Leeb, IMEKO 22nd TC3, 12th TC5 and 3rd TC22 International Conferences, 3 to 5 February, 2014, Cape Town, Republic of South Africa.
11. Kompatscher M., Equotip rebound hardness testing after D. Leeb, HARDMEKO 2004, Hardness Measurements Theory and Application in Laboratories and Industries 11–12 November, 2004, Washington, D.C., USA.
12. Sanponpute T., Apichaya Meesaplak, Measurement, 2010, vol. 43, no. 5, pp. 631–636. DOI:10.1016/j.measurement.2010.01.008
13. Hegazy R., Mohamad G., Mohamad M., Khaled K. M., Mohamad M. I., Empirical relation between Leeb rebound hardness and tensile strength for austenitic ductile cast iron, IMEKO 23rd TC3, 13th TC5 and 4rd TC22 International Conferences, 30 May to 1 June, 2017, Helsinki, Finland.
14. Chiumiento G., Di Lorenzo G., Formisano A., Leeb hardness experimental tests for mechanical characterization of structural steels, XVIII ANIDIS Conference – Seismic Engineering in Italy, 15 September – 19 October 2019, Ascoli Piceno, Italy.
Review
For citations:
Aslanyan A.E., Aslanyan E.G., Gavrilkin S.M., Doynikov A.S., Shchipunov A.N. National primary standard machine of Shore D hardness scale for metals and Leeb hardness scales. Izmeritel`naya Tekhnika. 2020;(2):6-10. (In Russ.) https://doi.org/10.32446/0368-1025it.2020-2-6-10
Views:
182
Email this article 