Generate QR code
Open Access
Subscription Access
The method of determining the metrological performance of unit reference standards of refection coefcient in waveguides at millimeter waves
https://doi.org/10.32446/0368-1025it.2020-1-59-63
Abstract
The analysis of the current state of the reflection coefficient measurements in waveguides at millimeter waves is carried out. An approach for solving the problem of reproducing the reflection coefficient measurement scale is proposed. Mathematical equations, which are the basis of the reflection coefficient measurement equation are obtained. The method of determining the metrological performance of reflection coefficient unit’s reference standards is developed. The results of electrodynamic modeling and analytical calculations by the developed method are compared. It is shown that this method can be used for reproducing the reflection coefficient unit in the development of the State primary standard.
About the Authors
A. S. Bondarenko
Russian metrological institute of technical physisl and radio engineering measurements
Russian Federation
Russian Federation
Alexander S. Bondarenko
Mendeleevo, Moscow region
A. S. Borovkov
Russian metrological institute of technical physisl and radio engineering measurements
Russian Federation
Russian Federation
Alexander S. Borovkov
Mendeleevo, Moscow region
I. M. Malay
Russian metrological institute of technical physisl and radio engineering measurements
Russian Federation
Russian Federation
Ivan M. Malay
Mendeleevo, Moscow region
V. A. Semyonov
Russian metrological institute of technical physisl and radio engineering measurements
Russian Federation
Russian Federation
Vadim A. Semyonov
Mendeleevo, Moscow region
References
1. Izyumov D. B., Kondratyuk E. L., Innovatika i ehkspertiza, 2018, no. 1 (22), p. 153–168 (in Russian).
2. Kuznetsov I. V., Malai I. M., Semenov V. A., Abstracts of XI All-Russian Scientifi c and Technical Conference “Metrology in radio electronics”, Mendeleevo, June 19–21, 2018, Mendeleevo, VNIIFTRI, 2018, ch. 2, pp. 75–82.
3. Gibin I. S., Kotlyar P. E., Uspekhi prikladnoi fi ziki, 2018, vol. 6, no. 2, p. 117–12 (in Russian).
4. Dansmor Dzhoehl’ P., Nastol’naya kniga inzhenera. Izmereniya parametrov SVCh-ustroistv s ispol’zovaniem peredovykh metodik vektornogo analiza tsepei, Moscow, TEKHNOSFERA, 2018. 736 p. (in Russian).
5. Doinikov A. S., Lektsii po metrologii, Mendeleevo, VNIIFTRI, 2018, 292 p. (in Russian).
6. Guba V. G., Ladur A. A., Savin A. A., Klassifi katsiya i analiz metodov kalibrovki vektornykh analizatorov tsepei, Doklady Tomsk State University of Control Systems and Radioelectronics, Tomsk, TUSUR Publ., 2011, № 2 (24), Ch. 1, pp. 149–155 (in Russian).
7. Lebedev I. V., Tekhnika i pribory SVCh. Ed. by akademika N. D. Devyatkova. Uchebnik dlya studentov vuzov po spetsial’nosti “Ehlektronnye pribory”, Moscow, Vysshaya Shkola Publ., 1970. 440 p. (in Russian).
8. Chernushenko A. M., Melanchenko N. E., Maloratskii L. G., Petrov B. V., Konstruktsii SVCh ustroistv i ehkranov. Textbook for universities, Moscow, Radio i svyaz’ Publ., 1984. 400 p. (in Russian).
9. Semenov N. A., Tekhnicheskaya ehlektrodinamika. Textbook for universities, Moscow, Svyaz’ Publ., 1973. 480 p. (in Russian).
10. Sharov G. A., Volnovodnye ustroistva santimetrovykh i millimetrovykh voln, Moscow, Goryachaya liniya – Telekom Publ., 2016. 640 p. (in Russian).
Review
For citations:
Bondarenko A.S., Borovkov A.S., Malay I.M., Semyonov V.A. The method of determining the metrological performance of unit reference standards of refection coefcient in waveguides at millimeter waves. Izmeritel`naya Tekhnika. 2020;(1):58-62. (In Russ.) https://doi.org/10.32446/0368-1025it.2020-1-59-63
Views:
189
Email this article 