Generate QR code
Open Access
Subscription Access
The correction scheme of temperature errors in the moisture meter transformer with cylindrical electrodes
https://doi.org/10.32446/0368-1025it.2022-12-52-57
Abstract
The aim of carried out investigations is the analysis of a different correction errors circuit of temperature in the moisture transformer with a cylindrical electrode in point of view increasing the measurements accuracy of grain and grain products moisture. The measurement accuracy in the moisture transformer depends on the constructive technological features, effective working possibilities and static characteristics linearity degree of its consisting elements. At the same time, an additive logo metric circuit, which can also be used in other capacitive transformers, has been considered. Using experimental method the dependence of the reactive resistance of cylindrical transformer on the capacity of cylindrical transformer in process of working with bulk materials has been obtained. We showed that when one is working with bulk materials the reactive resistance is decreased down sharply and at the same time the cylindrical transformer capacity value reaches the value 2 pF. Further, the reactive resistance is decreasing slowly on the capacity that demonstrates the change of the transformer sensitivity too. The functional dependence of capacity moisture transformer with cylindrical electrode sensitivity on the reactive resistance has been studied. Novelty of the carried out investigations in that we revealed the concrete value of moisture transformer capacity in which the sensitivity of the measuring device will be the highest value. It has been revealed that when the reactive resistance of the cylindrical transformer is growing then its sensitivity is decreasing. The maximal cylindrical transformer sensitivity reaches when the reactive resistance equals to 0.5⋅104 Оhm which corresponds to maximal change of the moisture transformer capacity when we working with bulk materials. It has been shown that the additive-logo metric circuit can be used for increasing accuracy of the grain and grain products moisture on the common reactive resistance 0.5⋅104 Оhm which allows reach the measuring device maximal sensitivity. All these conclusions we must take into account on projecting the basic elements of the transformer with cylindrical electrode for grain and grain products moisture.
Keywords
temperature errors,
moisture capacity transformer,
cylindrical electrode,
bulk materials,
additive-logo metric circuit
Supporting agencies: the work was supported by Uzbekistan-Belarus joint grant IL432684105.
About the Authors
T. Z. Nasirov
Geological Sciences University
Uzbekistan
Uzbekistan
Tulkun Z. Nasirov
Tashkent
K. Sh. Jabborov
Islam Karimov Tashkent State Technical University
Uzbekistan
Uzbekistan
Khamdam Sh. Jabborov
Tashkent
References
1. Koryakov V. I., Zaporojets A. S., Yeksina M. V., Parxomenko G. V., Effi ciency of introduction the new system for testing the capacitance moisture meters of the grain based on using the standard samples, Metrologiya i tochniye izmereniya, 1978, no. 9, рp. 5–14. (In Russ.)
2. Kumar Sh., Kumar K., Islam T., Sensors and Actuators B: Chemical, 2021, vol. 329, 128908. https://doi.org/10.1016/j.snb.2020.128908
3. Grachev A. V., Analysis of errors of measurement scheme of inductive sensor parameters transformers, Measuring. monitoring. Management. Control, 2018, no. 3(25). pp. 79–85. (In Russ.)
4. Kutsevol O. M., Dielectric measuring instrument of humidity of grain, Measuring and computing equipment in technological processes, 2015, no. 1(50). pp. 44–47. (In Russ.)
5. Usmanova X. A., Parpiyev M. P., Abduraxmanov O. X., Turgunbayev A., Super High frequency transformer of moisture of bulk and fi brous materials, Pribory, 2020, no. 3(237), pp. 33–38. (In Russ.)
6. Uljayev Е., Ubaydullayev U. M., Narzullayev Sh. N., Chemical Technology, Control and Management, 2020, vol. 4(94), pp. 23–30. https://doi.org/10.34920/2020.5-6.29-32
7. Kalandarov P. I., Mukimov Z. M., Logunova O. S., Technical Science and Innovation, 2021, no. 2, 5.
8. Kuluyev P. P., Matyaqubova P. M., Development of mathematical models of capacity transformers of moisture of grain and grain products, Metrology and Instrument-Making, 2021, no. 3(94), pp. 8–12. (In Russ.)
9. Grec hishnikov V. M., Komarov E. G., Measurement Techniques, 2020, vol. 63, no. 2, pp. 96–105. https://doi.org/10.1007/s11018-020-01756-6
10. Nasirov T. Z., Jabborov Kh. Sh., Journa l of Electrical and Electronic Engineering, 2022, vol. 10(2), pp. 57–63. https://doi.org/10.11648/j.jeee.20221002.13
11. Nasirov T. Z., Ismatullayev P. R., Jabborov Kh. Sh., Measurement Tec hniques, 2020, vol. 63, no. 9, pp. 758–764. https://doi.org/10.1007/s11018-021-01851-2
12. Nasirov T. Z., Ismatullayev P. R., Jabborov Kh. Sh., Calculation of capacitance for cone transformer of grain and grain products moisture, Pribory, 2019, no. 4. pp. 11–16. (In Russ.)
13. Arbuzov V. P., Mishina M. A., Correction of capacitive pressure sensor’s temperature error, Izvestiya visshix uchebnix zavedeniy. Povoljskii region. Texnicheskiye nauki, 2017, no. 3(43), pp. 94–105. (In Russ.) https://doi.org/10.21685/2072-3059-2017-3-8
14. Jabborov Kh. Sh., Boboyev G. G., Nasimxonov L. N., Projection of the capacitance cylindrical transformers of moisture of bulk materials on the elements sensitivity and reliability criteria, Pribory, 2017, no. 5(203), pp. 8–13. (In Russ.)
15. Ostreykovskii V. A., The reliability theory: textbook, Moscow, Vishshaya shkola Publ., 2003, 463 p. (In Russ.)
16. Yang Jie, Deng Xuan, Liu Qingquan, Ding Renhui, Meteorological applications, 2020, vol. 27(6), pp. 1–12. https://doi.org/10.1002/met.1972
Review
For citations:
Nasirov T.Z., Jabborov K.Sh. The correction scheme of temperature errors in the moisture meter transformer with cylindrical electrodes. Izmeritel`naya Tekhnika. 2022;(12):52-57. (In Russ.) https://doi.org/10.32446/0368-1025it.2022-12-52-57
Views:
118
Email this article 