Generate QR code
Open Access
Subscription Access
Development of the reference base and means of metrological assurance of gas analytical measurements in the Russian Federation
https://doi.org/10.32446/0368-1025it.2022-7-36-42
Abstract
The history of the formation of the reference base and metrological infrastructure of gas analytical measurements in the Russian Federation is presented. The State primary standard of units of molar fraction, mass fraction and mass concentration of components in gas and gas condensate media GET 154-2019 are described. The new equipment included in the newly approved standard GET 154-2019 is described. The main metrological characteristics of GET 154-2019 are presented in comparison with the metrological characteristics of similar standards of leading national metrological institutes of foreign countries. Information is provided on the participation of the GET 154 standard of different generations in international key comparisons conducted under the auspices of the Consultative Committee for Amount of Substance of the International Bureau of Weights and Measures. The assessment of metrological support of gas analytical measurements in the Russian Federation is given. The current tasks of gas analytical measurements in the field of environmental control, including control of emissions of pollutants, greenhouse gases, atmospheric air and working area air, in the field of the oil and gas industry, including control of the composition of hydrocarbon raw materials and products of its processing, in the field of control of the presence of ethanol vapors in the exhaled air are presented. The role and capabilities of GET 154-2019 in ensuring the uniformity of measurements for the transfer of units of measurement of the content of components to measuring instruments are shown.
Supporting agencies: the author is grateful to the staff of the Research department of state standards in the fi eld of physico-chemical measurements of the D. I.Mendeleyev Institute for Metrology for the materials provided and assistance in their discussion and interpretation.
About the Author
A. V. Kolobova
D. I. Mendeleev Institute for Metrology (VNIIM)
Russian Federation
Russian Federation
Anna V. Kolobova
St. Petersburg
References
1. Kolobova A. V., Konopelko L. A., Popov O. G., Measurement standards. Reference materials, 2019, no. 16(3), рр. 23–35. (In Russ) https://doi.org/10.20915/2687-0886-2020-16-3-23-35
2. Guenther F. R., Rhoderick G. C., Marschal A., et al, Metrologia, 2002, vol. 39, no. 1A, 08006. https://doi.org/10.1088/0026-1394/39/1A/25
3. Konopelko L. A., Kustikov Y. A., Vishnyakov I. M., et al, Metrologia, 2010, vol. 47, no. 1A, 08004. https://doi.org/10.1088/0026-1394/47/1A/08004
4. Lee Jinbok, Lee Jeongsoon, Moon Dongmin, et al, Metrologia, 2011, vol. 48, no 1A, 08004. https://doi.org/10.1088/0026-1394/48/1A/08004
5. Guenther Franklin R., Kelley Michael E., Mitchell Gerald D., et al Metrologia, 2011, vol. 48, no. 1A, 08015. https://doi.org/10.1088/0026-1394/48/1A/08015
6. Lee Jeongsoon, Moon Dongmin, Lee Jinbok, et al, Metrologia, 2017, vol. 54, no. 1A, 08016. https://doi.org/10.1088/0026-1394/54/1A/08016
7. Lim Jeong Sik, Lee Jinbok, Moon Dongmin, et al, Metrologia, 2017, vol. 54, no. 1A, 08017. https://doi.org/10.1088/0026-1394/54/1A/08017
8. le Viallon, Flores Edgar, Idrees Faraz, et al, Metrologia, 2017, vol. 54, no. 1A, 08029. https://doi.org/10.1088/0026-1394/54/1A/08029
9. Brewer P. J., Downey M. L., Atkins E., et al, Metrologia, 2018, vol. 55, no. 1A, 08004. https://doi.org/10.1088/0026-1394/55/1A/08004
10. Flores Edgar, Viallon Joële, Choteau Tiphaine, et al, Metrologia, 2019, vol. 56, no. 1A, 08001. https://doi.org/10.1088/0026-1394/56/1A/08001
11. van der Veen Adriaan M. H., Zalewska Ewelina T., van Osselen Deborah R., Metrologia, 2020, vol. 57, no. 1A, 08011. https://doi.org/10.1088/0026-1394/57/1A/08011
12. Gurevich V. G., Pavlov A. V., Pavlova I. V., Thermo gravimetric device with multicamera thermostat for calibration of gas microstream sources. Productivity stabilization of permeable gas microstream sources, Nauchnoe Priborostroenie, 2018, vol. 28, no. 1, pp. 69–78 (in Russ.)
13. Control of industrial emissions by automated measuring system, ed. L. Konopelko, O. Popov, St. Petersburg, Triumph publ., 2021, 286 p. (In Russ.)
14. Malginov A. V., Popov O. G., Kolobova A. V., Konopelko L. A., Kustikov Y. A., Measurement standards. Reference materials, 2020, no. 16(4), рр. 17–26.(In Russ.) https://doi.org/10.20915/2687-0886-2020-16-4-17-26
15. Bakhmetyev P. I., Knyazev O. V., Konopelko L. A., Popova T. A., Pivovarova N. O., Development and implementation of a set of new interstate gas quality standards harmonized with international standards, Gas industry, 2012, no. S(680), рр. 67–71(in Russ.)
16. Konopelko L. A., Sarvarov L. V., Samokhin S. V., Kolobova A. V., Popova T. A., Meshkov A. V., Pivovarova N. O., Metrological assurance of quality control of hydrocarbon raw materials and products of its processing, Gas industry, 2019, no. S2(786), рр. 18–27(in Russ.)
Review
For citations:
Kolobova A.V. Development of the reference base and means of metrological assurance of gas analytical measurements in the Russian Federation. Izmeritel`naya Tekhnika. 2022;(7):36-42. (In Russ.) https://doi.org/10.32446/0368-1025it.2022-7-36-42
Views:
210
Email this article 