Generate QR code
Open Access
Subscription Access
Method for digitally modulated signals synthesis with normalized parameters
https://doi.org/10.32446/0368-1025it.2022-5-56-61
Abstract
The paper investigates the possibility of creating a calibrator of the parameters of signals with digital modulation based on an arbitrary waveform generator. A method is proposed for reproducing calibration signals with a given value of the error vector magnitude by adding a normalized distortion. A particular case of the method is considered, where amplitude and phase modulation is used as the normalized distortion. Experimental confirmation of the possibility of transferring the size of units of the modulation depth and phase deviation from the primary standards GET 166-2020 and GET 180-2010 to the calibrator of the parameters of signals with digital modulation has been obtained.
About the Authors
I. V. Mogilev
Russian Metrological Institute of Technical Physics and Radio Engineering Measurements
Russian Federation
Russian Federation
Ivan V. Mogilev
Mendeleevo, Moscow region
N. R. Bazhenov
Russian Metrological Institute of Technical Physics and Radio Engineering Measurements
Russian Federation
Russian Federation
Nikolay R. Bazhenov
Mendeleevo, Moscow region
References
1. 3rd Generation Partnership Project; Technical Specifi cation Group Radio Access. Network Base Station (BS) сonformance testing (FDD) (Release 16), Dec. 2018.
2. Shostko I., Derevyanko N., Analysis of distorting factors action on the signal quality of digital terrestrial television system DVB, Radio engineering, 2015, iss. 182, pp. 51–57. (In Russ.)
3. Zhang Rui, Zhou Feng, Guo Long-qing, Wang Nan, 75th ARFTG Microwave Measurement Conference, 28 May 2010, Anaheim, CA, USA, IEEE, 2010. https://doi.org/10.1109/ARFTG.2010.5496333
4. Hudlicka M., Laboratory System for a Traceable Measurement of Error Vector Magnitude, 39th European Microwave Conference (EuMC), 29 Sept. – 1 Oct. 2009, Rome, Italy.
5. Humphreys D. A., Harper M. R., McInnes L. K. J., Miall J., Strategy for traceability of complex modulated signals using RF waveform metrology, Proc. of XXIX URSI General Assembly, Chicago, USA, Aug. 2008, A03.6.
6. Zhang Rui, Zhou Feng, Gu Long-qing, Wang Nan, CPEM 2010, June 13–18, 2010, Daejeon, Korea (South) IEEE, 2010, pp. 361–362. https://doi.org/10.1109/CPEM.2010.5543533
7. Bazhenov N. R., Mylnikov A. V., Malay I. M., New tasks of metrological assurance of measurements of parameters of radiotechnical signals, Al’manac of Modern Metrology, 2019, no. 2 (18), рр. 23–36. (In Russ.)
8. Mogilev I. V., Stalnova K. A., Calibration of meters of parameters of signals with digital modulation in terms of amplitude and phase errors using harmonic signals with amplitude and phase modulation, Abstracts of the report at the VIII scientifi cpractical conference of young scientists, graduate students and specialists “Metrology in the XXI century”, Mendeleevo, 21 March 2019, Mendeleevo, VNIIFTRI Publ., 2019, pp. 147–152. (In Russ.)
9. Stalnova K. A., Titarenko A. V., Investigation of the method of “equivalent signals” for the reproduction of signals with a normalized error vector magnitude, Digital signal processing application considerations, 2018, vol. 8, no. 2, pp. 212–217. (In Russ.)
Review
For citations:
Mogilev I.V., Bazhenov N.R. Method for digitally modulated signals synthesis with normalized parameters. Izmeritel`naya Tekhnika. 2022;(5):56-61. (In Russ.) https://doi.org/10.32446/0368-1025it.2022-5-56-61
Views:
124
Email this article 