Generate QR code
Open Access
Subscription Access
National primary standard machine on Brinell hardness scales GET 33-2020
A. E. Aslanyan,
E. G. Aslanyan,
S. M. Gavrilkin,
A. S. Doynikov,
A. A. Petukhov,
P. V. Sorokina,
A. N. Shchipunov,
L. V. Yurov https://doi.org/10.32446/0368-1025it.2022-5-10-14
Abstract
The results of research and improvement of the National primary standard machine on Brinell hardness scales GET 33-85 are presented. The standard was improved at the Russian Metrological Institute of Technical Physics and Radio Engineering (VNIIFTRI) from 2018 to 2020 in order to ensure the uniformity of hardness measurements according to the Brinell scales. The range of reproduction of Brinell hardness numbers has been expanded, the number of reproducible scales by the standard has been increased. New standard nodes have been developed and created to ensure the reproduction of Brinell hardness numbers in accordance with modern international requirements. The State primary hardness Standard according to the Brinell scales GET 33-2020 has been approved. Metrological characteristics of GET 33-2020 were investigated, a budget of measurement uncertainty was compiled when reproducing hardness numbers according to the Brinell scales. Measuring instruments traceable to GET 33-2020 are used in metallurgy, energy, aerospace, machine tool industry.
About the Authors
A. E. Aslanyan
Russian Metrological Institute of Technical Physics and Radio Engineering
Russian Federation
Russian Federation
Andrey E. Aslanyan
Mendeleevo, Moscow region
E. G. Aslanyan
Russian Metrological Institute of Technical Physics and Radio Engineering
Russian Federation
Russian Federation
Edward G. Aslanyan
Mendeleevo, Moscow region
S. M. Gavrilkin
Russian Metrological Institute of Technical Physics and Radio Engineering
Russian Federation
Russian Federation
Sergey M. Gavrilkin
Mendeleevo, Moscow region
A. S. Doynikov
Russian Metrological Institute of Technical Physics and Radio Engineering
Russian Federation
Russian Federation
Aleksandr S. Doynikov
Mendeleevo, Moscow region
A. A. Petukhov
Russian Metrological Institute of Technical Physics and Radio Engineering
Russian Federation
Russian Federation
Aleksey A. Petukhov
Mendeleevo, Moscow region
P. V. Sorokina
Russian Metrological Institute of Technical Physics and Radio Engineering
Russian Federation
Russian Federation
Polina V. Sorokina
Mendeleevo, Moscow region
A. N. Shchipunov
Russian Metrological Institute of Technical Physics and Radio Engineering
Russian Federation
Russian Federation
Andrey N. Shchipunov
Mendeleevo, Moscow region
L. V. Yurov
Russian Metrological Institute of Technical Physics and Radio Engineering
Russian Federation
Russian Federation
Lev V. Yurov
Mendeleevo, Moscow region
References
1. Doynikov A. S., Izmeryemaya velichina, Bol’shaya Rossiyskaya Enciklopediya, 2016, available at: https://bigenc.ru/physics/text/2002348 (accessed: 18.03.2022). (In Russ.)
2. Doynikov A. S., Izmeryemoe svoistvo, Bol’shaya Rossiyskaya enciklopediya, 2016, available at: https://bigenc.ru/physics/text/2002364 (accessed: 18.03.2022). (In Russ.)
3. Doynikov A. S., Lekcii po metrologii. Mendeleevo, FSUE “VNIIFTRI” Publ., 2018, 292 p. (In Russ.)
4. Yukimi Tanaka, Yutaka Seino, Koichiro Hattori, Measurement Science and Technology, 2019, vol. 30, no. 6, 065012. https://doi.org/10.1088/1361-6501/ab150f
5. Ma L., Low S., Song J., An approach to determining the Brinell hardness indentation diameter based on contact position, XX IMEKO World Congress Metrology for Green Growth, September 9−14, 2012, Busan, Republic of Korea, pp. 308–312.
6. Herrmann K., Hardness Testing Principles and Applications. Brinell ISO 6506 and ASTM E10 Procedures, ASM International, Novelty, USA, 2011, pp. 52–61.
7. Alessandro Germak, Claudio Origlia, Analysis and estimation of possible large systematic error in Brinell hardness measurements, HARDMEKO 2007 Recent Advancement of Theory and Practice in Hardness Measurement, 19–21 November, 2007, Tsukuba, Japan, pp. 76–80.
8. Martins A. R., Paciornik S., Pereira J. A. S., Brinell hardness: image analysis and uncertainty, XVI IMEKO World Congress Measurement – Supports Science – Improves Technology – Protects Environment and Provides Employment – Now and in the Future, Vienna, Austria, 2000, September 25–28.
9. Machado R. R., Azeredo C. R., Souza M. M., Frade F. C., Costa P. B., Comparison of Brinell measurement systems on the edge indents identifi cation, IMEKO 23rd TC3, 13th TC5 and 4th TC22 International Conference 30 May to 1 June, 2017, Helsinki, Finland, pp. 304–307.
10. Machado R. R., Oliveira S. P., Koch C. A., Silva I. D., Muniz B. C. O., Infl uence of diff erent numerical apertures on hardness values using an automatic system of measurement, HARDMEKO 2007 Recent Advancement of Theory and Practice in Hardness Measurement, 19–21 November, 2007, Tsukuba, Japan, pp. 71–75.
11. Koichiro Hattori, Takashi Usuda, Primary hardness standard of Brinell hardness in Japan, XVIII IMEKO World Congress Metrology for a Sustainable Development, September, 17–22, 2006, Rio de Janeiro, Brazil.
12. Aslanyan A., Aslanyan E., Obozniy E., Galat E., Dovzhenko Y., Zhamanbalin M., Metrologia, 2020, vol. 57, no. 1A, 07003. https://doi.org/10.1088/0026-1394/57/1a/07003
13. Aslanyan A. E., 2021, Measurement Techniques, 2021, vol. 64, no. 8, pp. 628–632. https://doi.org/10.1007/s11018-021-01982-6
14. Petukhov A. A., Computer program no. RU 2021669102, Computer Programs, Databases, TIC, no. 12 (2021).
Review
For citations:
Aslanyan A.E., Aslanyan E.G., Gavrilkin S.M., Doynikov A.S., Petukhov A.A., Sorokina P.V., Shchipunov A.N., Yurov L.V. National primary standard machine on Brinell hardness scales GET 33-2020. Izmeritel`naya Tekhnika. 2022;(5):10-14. (In Russ.) https://doi.org/10.32446/0368-1025it.2022-5-10-14
Views:
250
Email this article 