Generate QR code
Open Access
Subscription Access
Измерение основных геометрических характеристик потока частиц между наплавочной головкой и подложкой
Abstract
Method for determining geometric characteristics of the gas-powder flow in laser powder cladding with the coaxial injection is proposed. Effect of the working parameters of powder feed rate and the channel width on geometry of the particle flow is evaluated. Optical diagnostic of laser cladding by infrared camera, providing information on temperature of the powder in the flow, is performed.
About the Authors
И. Жирнов
Московский государственный технологический университет «СТАНКИН»
Russian Federation
Russian Federation
М. Дубенская
Московский государственный технологический университет «СТАНКИН»
Russian Federation
Russian Federation
И. Смуров
Московский государственный технологический университет «СТАНКИН»
Russian Federation
Russian Federation
В. Телешевский
Московский государственный технологический университет «СТАНКИН»
Russian Federation
Russian Federation
References
1. Ion J. Laser processing of engineering materials: principles, procedure and industrial application. Great Britain: Elsevier Butterworth-Heinemann, 2005.
2. Weisheit A., Gasser A., Backes G., Jambor T., Pirch N., Wissenbach K. Direct Laser Cladding, Current Status and Future Scope of Application // Laser-Assisted Fabrication of Materials, J. Dutta Majumdar and I. Manna (eds.), Springer Series in Materials Science 161, Berlin: Springer-Verlag, 2013. Р. 221-240.
3. Pawlowski L. The science and engineering of thermal spray coatings. Chichester: John Wiley & Sons, 2008.
4. Vilar R. Laser Powder Deposition // Comprehensive Materials Processing, USA: Elsevier Ltd, 2014.Р. 163-216.
5. Zhong M., Liu W. Laser surface cladding: the state of the art and challenges // Proc. Institution of Mechanical Engineers. Part C: Mechanical Engineering Science. 2010. V. 224. N. 5. P. 1041-1060.
6. Doubenskaia M., Smurov I., Grigoriev S., Pavlov M. Complex analysis of elaboration of steel-TiC composites by direct metal deposition // J. Laser Appl. 2013. V. 25. N. 4. P. 1357-1362.
7. Gladush G. G., Smurov I. Physics of laser materials processing: theory and experiment. N.Y: Springer Science & Business Media. 2011.
8. Gu D. D., Meiners W., Wissenbach K., Poprawe R. Laser additive manufacturing of metallic components: materials, processes and mechanisms // Int. mater. rev. 2012. V. 57. N. 3. Р. 133-164.
9. Smurov I., Doubenskaia M., Grigoriev S., Nazarov A. Optical monitoring in laser cladding of Ti6Al4V // J. therm. spray tech. 2012. V. 21. N. 6. P. 1357-1362.
10. Doubenskaia M., Pavlov M., Grigoriev S., Smurov I. Definition of brightness temperature and restoration of true temperature in laser cladding using infrared camera // Surface and Coatings Technology. 2013. Р. 244-247.
11. Попова Е. В., Тарасова Т. В., Смуров И. Ю., Сарбаев Б. С. Применение лазерной наплавки для устранения дефектов в титановых сплавах // Наука и образование: электронное научно-техническое издание. 2012. №. 3. С. 50 [Электрон. версия] http://technomag.edu.ru/doc/330149.html (дата обращения 12.05.2015 г.).
12. Doubenskaia M., Smurov I., Grigoriev S., Pavlov M., Tikhonova E. Optical monitoring in elaboration of metal matrix composites by direct metal deposition // Physics Proc. 2012. Т. 39. Р. 767-775.
13. Smurov I., Doubenskaia M., Zaitsev A. Comprehensive analysis of laser cladding by means of optical diagnostics and numerical simulation // Surface and Coatings Technology. 2013. V. 220. Р. 112-121.
14. Pavlov M., Novichenko D., Doubenskaia M. Optical Diagnostics of Deposition of Metal Matrix Composites by Laser Cladding // Physics Proc. 2011. N. 12. Р. 674-682.
15. Smurov I., Doubenskaia M., Grigoriev S., Antonenkova G., Zaitsev A. Integrated analysis of direct metal deposition based on comprehensive optical diagnostics and numerical simulation // Рroc. HT&SE. Chennai (India). 2013.
Review
For citations:
, , , . Izmeritel`naya Tekhnika. 2016;(11):37-39. (In Russ.)
Views:
91
Email this article 