Preview

Izmeritel`naya Tekhnika

Advanced search
Open Access Open Access  Restricted Access Subscription Access

Особенности метода кросс-калибровки в лазерной гониометрии

Abstract

A simplified cross-calibration procedure used in a dynamic laser goniometer, when the angular displacement step of the studied angle sensor exceeds its discreteness are considered. It is shown that the methodical error of this procedure with M angular displacement steps of the angle sensor is determined by the total amplitude of M -harmonic and by multiples of harmonics of the dynamic laser goniometer systematic error. It is proved experimentally that when the angular displacement step of the angle sensor is less than 120° the methodical error does not exceed 0,01".

About the Author

П. Павлов
Санкт-Петербургский государственный электротехнический университет «ЛЭТИ» им. В. И. Ульянова (Ленина)
Russian Federation


References

1. Sim P. J. Modern Techniques in Metrology // World Sci. 1984. P. 102-121.

2. Probst R., Wittekopf R., Krause M., Dangschat H., Ernst A. The new PTB angle comparator // Meas. Sci. Technol. 1998. N. 9. P. 1059-1066.

3. Бурнашев М. Н., Павлов П. А., Филатов Ю. В. Разработка прецизионных лазерных гониометрических систем // Квантовая электроника. 2013. Т. 43. № 2. С. 130-138.

4. Корн Г. Справочник по математике (для научных работников и инженеров): М.: Наука, 1974.

5. Павлов П. А. Анализ алгоритмов измерений лазерным динамическим гониометром // Измерительная техника. 2008. № 1. С. 17-20.

6. Баринова Е. А., Иващенко Е. М., Павлов П. А. Кольцевой лазер в прецизионных угловых измерениях // Лазеры. Измерения. Информация: Сб. докл. 21-й Междунар. конф. 2011. Т. 1. С. 62-75.

7. Иващенко Е. М., Павлов П. А. Метод устранения влияния магнитного поля в лазерном динамическом гониометре // Измерительная техника. 2012. № 10. С. 18-22.

8. Баринова Е. А., Гордеев С. В., Иващенко Е. М., Павлов П. А. Метод и результаты исследования случайной погрешности оптического датчика угла // Метрология. 2011. № 7. С. 17-25.


Review

For citations:


  . Izmeritel`naya Tekhnika. 2015;(9):21-24. (In Russ.)

Views: 157


ISSN 0368-1025 (Print)
ISSN 2949-5237 (Online)